View DSA304309KS_878712.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

max switching frequency ( f ) khz rated operational current ( i e ) ma 5 5 5 5 5 5 5 5 200 200 200 200 200 200 200 200 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca4/4608ls) diameters 4 - 5 mm ? amplified in d.c. 3 wires ? cable output ? d l5 l1 l2 led l1 l2 l3 l5 led d housing a-3 housing b-6 technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,15 mm 2 protected against short-circuit and overload (versions with letter k) protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm nominal sensing distance ( s n ) 10% mm pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + no i brown black blue --- + nc i brown black blue --- + a - 3 a - 3 a - 3 a - 3 b - 6 b - 6 b - 6 b - 6 ? ? ? ? ? ? ? ? - 3 - 3 - 3 - 3 25 22 30 27 20 17 25 22 - - - - 5 5 5 5 25 25 30 30 25 25 30 30 3 3 3 3 3 3 3 3 4 4 4 4 m5 x 0,5 m5 x 0,5 m5 x 0,5 m5 x 0,5 0,8 1,4 1 1,4 0,8 1,4 1 1,4 dca4/4609ls dca4/5609ls dca4/4b09lks dca4/5b09lks dca5/4609s dca5/5609s dca5/4b09ks dca5/5b09ks dca4/4619ls dca4/5619ls dca4/4b19lks dca4/5b19lks dca5/4619s dca5/5619s dca5/4b19ks dca5/5b19ks m5 x 0,5 sw7 2,5 2 diameter max tightening torque nm nut size thickness mm materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: stainless steel sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-13 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-13 www..net
npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca6, 5/4608lks) ? diameters 6,5 - 8 mm ? amplified in d.c. 3 and 4 wires ?cable output d l5 l1 l2 led l1 l2 l3 l5 led d housing a-3 housing b-6 technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,15 mm 2 on 4 wires versions 0,22 mm 2 on 3 wires versions protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm nominal sensing distance ( s n ) ?0% mm max switching frequency ( f ) khz no-load supply current (l e ) ma pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- a - 3 a - 3 a - 3 b - 6 a - 3 b - 6 ? ? ? ? ? ? - 5 - - 5 5 45 40 45 40 40 35 - - - 5 - 5 45 45 45 45 45 45 3,5 3,5 3,5 3,5 3,5 3,5 6,5 6,5 8 m8 x 1 8 m8 x 1 1,5 2,5 1,5 1,5 2,5 2,5 4 3 4 4 3 3 dca6,5/4609lks dca6,5/5609lks dca8/4609lks dca8/4609ks dca8/5609lks dca8/5609ks dca6,5/4619lks dca6,5/5619lks dca8/4619lks dca8/4619ks dca8/5619lks dca8/5619ks dca6,5/4629lks dca6,5/5629lks dca8/4629lks dca8/4629ks dca8/5629lks dca8/5629ks 200 200 200 200 200 200 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: stainless steel sensing face: plastic m8 x 1 sw13 4 10 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-14 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-14 www..net
diameters 12 mm ? amplified in d.c. 3 and 4 wires ? cable output ? npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca12/4608ks) no i brown black blue --- + no + nc i black brown white blue + --- nc i brown black blue --- + no i brown black blue --- + l1 l2 l3 l5 led d l1 l2 l3 l4 l5 led d housing b-3 housing d technical data: supply voltage (u b ): 5 40 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,35 mm 2 on 3 wires 0,25 mm 2 on 4 wires protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz rated operational current ( i e ) ma pnp (positive switching) ordering references b - 3 d b - 3 d ? ? ? ? - - 7 7 43 50 36 43 7 10 7 10 50 80 50 80 - 20 - 20 4 4 4 4 m12 x 1 m12 x 1 m12 x 1 m12 x 1 2 2 4 4 2 2 1,5 1,5 dca12/4609ks dca12/4709ks dca12/5609ks dca12/5709ks dca12/4619ks dca12/4719ks dca12/5619ks dca12/5719ks dca12/4629ks dca12/4729ks dca12/5629ks dca12/5729ks 200 200 200 200 nc i brown black blue --- + no + nc i black brown white blue + --- materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: nickel plated brass sensing face: plastic max tightening torque nm nut m12 x 1 m14 x 1 m16 x 1 size sw17 sw17 sw22 thickness mm 4 4 4 15 20 25 diameter bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-15 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-15 www..net
npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca18/4a08ks) no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- no + nc i black brown white blue + --- nc i brown black blue --- + no i brown black blue --- + ? diameters 18 mm ? amplified in d.c. 3 and 4 wires ?cable output d l1 l5 l2 l3 l4 led l1 l2 l5 led d d l1 l5 l2 l3 led housing b-2 housing c housing d-1 technical data: supply voltage (u b ): 5 60 v max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz no-load supply current ( i e ) ma pnp (positive switching) ordering references b - 2 b - 2 c d - 1 c d - 1 ? ? ? ? ? ? - 10 - - 10 10 50 40 58 60 48 50 - - 12 12 12 12 50 50 70 92 70 92 - - - 20 - 20 5 5 5 6 5 6 m18 x 1 m18 x 1 m18 x 1 m18 x 1 m18 x 1 m18 x 1 5 8 5 5 8 8 1 1 1 1 1 1 dca18/4a09ks dca18/5a09ks dca18/4609ks dca18/4709ks dca18/5609ks dca18/5709ks dca18/4a19ks dca18/5a19ks dca18/4619ks dca18/4719ks dca18/5619ks dca18/5719ks dca18/4a29ks dca18/5a29ks dca18/4629ks dca18/4729ks dca18/5629ks dca18/5729ks 400 400 400 400 400 400 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: nickel plated brass sensing face: plastic m18 x 1 sw24 4 35 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-16 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-16 www..net
l1 l2 l3 l5 led d d l1 l5 l2 l3 l4 led housing d-2 housing g d l5 l2 l3 led housing g-1 diameters 30 - 45 mm ? amplified in d.c. 3 and 4 wires ? cable output ? technical data: supply voltage (u b ): 7 60 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz no-load supply current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca30/4608ks) pnp (positive switching) ordering references g d - 2 g d - 2 g -1 ? ? ? ? ? - - 15 15 - 50 65 35 50 50 10 10 10 10 10 60 95 60 95 60 - 20 - 20 6 6 6 6 6 m30 x 1,5 m30 x 1,5 m30 x 1,5 m30 x 1,5 m45 x 1,5 10 10 15 15 20 0,8 0,8 0,4 0,4 0,15 dca30/4609ks dca30/4709ks dca30/5609ks dca30/5709ks dca45/4609ks dca30/4619ks dca30/4719ks dca30/5619ks dca30/5719ks dca45/4619ks dca30/4629ks dca30/4729ks dca30/5629ks dca30/5729ks dca45/4629ks 400 400 400 400 400 no + nc i black brown white blue + --- nc i brown black blue --- + no i brown black blue --- + no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: nickel plated brass sensing face: plastic max tightening torque nm nut m30 x 1,5 m45 x 1,5 size sw36 sw55 thickness mm 5 5 80 70 diameter bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-17 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-17 www..net
?diameters 4 - 5 - 6,5 - 8 mm ?amplified in c.c. ?connector output m8 x 1 d l1 l5 l2 l3 l4 m8 x1 4 x led 1 4 3 d l1 l5 l2 l3 l4 m8 x1 4 x led 1 4 3 d l1 l5 l2 l4 4 x led m8 x 1 1 4 3 housing i-3 housing i-4 housing i-5 technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca4/4908lks) pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + i - 3 i - 3 i - 4 i - 4 i - 5 i - 5 i - 10 i - 10 - 3 - 3 - 5 - 5 22 19 22 19 48,5 43,5 40 35 12 12 12 12 - - 8,5 8,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 39,5 39,5 39,5 39,5 54 54 54 54 11-12 11-12 11-12 11-12 11-12 11-12 11-12 11-12 4 4 m5 x 0,5 m5 x 0,5 6,5 6,5 m8 x 1 m8 x 1 1 1,4 1 1,4 1,5 2,5 1,5 2,5 5 5 5 5 4 3 4 3 200 200 200 200 200 200 200 200 dca4/4909lks dca4/5909lks dca5/4909ks dca5/5909ks dca6,5/4909lks dca6,5/5909lks dca8/4909ks dca8/5909ks dca4/4919lks dca4/5919lks dca5/4919ks dca5/5919ks dca6,5/4919lks dca6,5/5919lks dca8/4919ks dca8/5919ks d l1 l5 l2 l4 4 x led m8 x 1 l3 1 4 3 housing i-10 diameter max tightening torque nm nut m5x 0,5 m8 x 1 size sw7 sw13 thickness mm 2,5 4 2 10 materials: housing: stainless steel sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-18 cylindrical inductive sensors in metal housing a018 9-02-2007 9:00 pagina a-18 www..net
nc i 1 brown 2 white 3 blue --- + no i 1 brown 4 black 3 blue --- + no + nc i 4 black 1 brown 2 white 3 blue + --- d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-11 housing i-7 diameters 8 - 12 mm ? amplified in d.c. ? connector output m12 x 1 ? housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca8/4308ks) pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + i -11 i -11 i - 7 i - 7 ? ? ? ? - 5 - 7 40 35 43 36 12 12 15 15 8 8 8 8 60 60 66 66 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m8 x 1 m12 x 1 m12 x 1 1,5 2,5 2 4 4 3 2 1,5 200 200 200 200 dca8/4309ks dca8/5309ks dca12/4309ks dca12/5309ks dca8/43c9ks dca8/53c9ks dca12/43c9ks dca12/53c9ks no + nc i 4 black 1 brown 2 white 3 blue + --- dca8/4329ks dca8/5329ks dca12/4329ks dca12/5329ks technical data: supply voltage (u b ): diameter 8 mm 7 30 vdc diameter 12 mm 5 40 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 materials: housing diametro 8 mm: stainless steel housing diametro 12 mm nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 size sw13 sw17 thickness mm 4 4 10 15 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-19 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) o 23-01-2007 13:29 pagina a-19 www..net
no + nc i 4 black 1 brown 2 white 3 blue + --- no i 1 brown 4 black 3 blue --- + technical data: supply voltage (u b ): diameter 18 mm 5 60 vdc diameters 30 and 45 mm 7 60 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 ? diameters 18 - 30 - 45 mm ? amplified in d.c. ?connector output m12 x 1 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-12 nc i 1 brown 2 white 3 blue --- + no i 1 brown 4 black 3 blue --- + housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca18/4308ks) pnp (positive switching) ordering references nc i 1 brown 2 white 3 blue --- + i - 12 i - 12 i - 2 i - 2 i -15 ? ? ? ? ? - 10 - 15 - 50 50 65 50 50 19 19 17 17 19 8 8 8 8 8 77 87 90 90 77 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 m45 x 1,5 5 8 10 15 20 1 1 0,8 0,4 0,15 400 400 400 400 400 dca18/4309ks dca18/5309ks dca30/4309ks dca30/5309ks dca45/4309ks dca18/43c9ks dca18/53c9ks dca30/43c9ks dca30/53c9ks dca45/43c9ks no + nc i 4 black 1 brown 2 white 3 blue + --- dca18/4329ks dca18/5329ks dca30/4329ks dca30/5329ks dca45/4329ks d l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-15 materials: housing: nickel plated brass sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-20 cylindrical inductive sensors in metal housing max tightening torque nm nut m18 x 1 m30 x 1,5 m45 x 1,5 size sw24 sw36 sw55 thickness mm 4 5 5 35 80 70 diameter d l1 l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-2 catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-20 www..net
housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca18/4208ks) pnp (positive switching) ordering references no 3 2 1 - + i nc - + 3 2 1 i no 3 2 1 - + i nc - + 3 2 1 i m - 1 m - 4 m - 1 m - 4 ? ? ? ? - - 10 10 60 60 50 50 - 40 - 40 33 13 33 13 96 113 96 113 1 1 1 1 m18 x 1 m18 x 1 m18 x 1 m18 x 1 5 5 8 8 1 1 1 1 400 400 400 400 dca18/4209ks dca18/4409ks dca18/5209ks dca18/5409ks dca18/4219ks dca18/4419ks dca18/5219ks dca18/5419ks mm mm mm mm mm n mm mm khz ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca18/4e08ks) pnp (positive switching) no 1 4 3 - + i nc 1 2 3 - + i m m ? ? - 10 60 50 50 50 - - 110 110 2 2 m18 x 1 m18 x 1 5 8 1 1 400 400 dca18/4e09ks dca18/5e09ks dca18/4e19ks dca18/5e19ks no + nc 4 1 2 3 + - i no 1 4 3 - + i nc 1 2 3 - + i no + nc 4 1 2 3 + - i dca18/4e29ks dca18/5e29ks d l1 l5 l2 l3 30 l4 led d l1 l5 l2 l3 30 led d l1 l5 l2 l4 43 led 12 30 diameter 18 mm ? amplified in d.c. ? connector output c1 - c2 ? housing m-1 housing m-4 housing m technical data: supply voltage (u b ): 5 60 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip65 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 materials: housing: nickel plated brass sensing face and socket connerctor: plastic m18 x 1 sw24 4 35 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-21 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) o 23-01-2007 13:29 pagina a-21 www..net
d l1 l5 l2 l3 led l4 30 housing m-5 d l1 l5 l2 l3 led l4 46 12 30 housing m-2 housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) khz no-load supply current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca30/4208ks) pnp (positive switching) ordering references no 3 2 1 - + i nc - + 3 2 1 i no 3 2 1 - + i nc - + 3 2 1 i m - 2 m - 5 m - 2 m - 5 ? ? ? ? - - 15 15 65 65 50 50 10 28 10 28 40 13 40 13 115 106 115 106 1 1 1 1 m30 x 1,5 m30 x 1,5 m30 x 1,5 m30 x 1,5 10 10 15 15 0,8 0,8 0,4 0,4 400 400 400 400 dca30/4209ks dca30/4409ks dca30/5209ks dca30/5409ks dca30/4219ks dca30/4419ks dca30/5219ks dca30/5419ks mm mm mm mm mm n mm mm khz ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca30/4e08ks) pnp (positive switching) no 1 4 3 - + i nc 1 2 3 - + i m - 6 m - 6 ? ? - 15 56 41 51 51 - - 107 107 2 2 m30 x 1,5 m30 x 1,5 10 15 0,8 0,4 400 400 dca30/4e09ks dca30/5e09ks dca30/4e19ks dca30/5e19ks no + nc 4 1 2 3 + - i dca30/4e29ks dca30/5e29ks d l1 l5 l2 l3 led ? diameter 30 mm ? amplified in d.c. ?connector output c1 - c2 technical data: supply voltage (u b ): 7 60 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip65 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing m-6 m30 x 1,5 sw36 5 80 diameter max tightening torque nm nut size thickness mm materials: housing: nickel plated brass sensing face and socket connerctor: plastic no 1 4 3 - + i nc 1 2 3 - + i no + nc 4 1 2 3 + - i bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-22 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) o 23-01-2007 13:29 pagina a-22 www..net
d l1 l5 l2 l3 led l4 46 12 30 d l5 l2 l3 led diameter 45 mm ? amplified in d.c. ? connector output c1 - c2 ? housing m-2 housing m-3 technical data: supply voltage (u b ): 7 60 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip65 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca45/4208ks) pnp (positive switching) ordering references no 3 2 1 - + i nc - + 3 2 1 i no 3 2 1 - + i nc - + 3 2 1 i m - 2 ? - 50 10 42 102 1 m45 x 1,5 20 0,15 400 dca45/4209ks dca45/4219ks mm mm mm mm mm n mm mm khz ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie dca45/4e08ks) pnp (positive switching) no 1 4 3 - + i nc 1 2 3 - + i m - 3 ? - 50 28 - 78 2 m45 x 1,5 20 0,15 400 dca45/4e09ks dca45/4e19ks no + nc 4 1 2 3 + - i no 1 4 3 - + i nc 1 2 3 - + i no + nc 4 1 2 3 + - i dca45/4e29ks materials: housing: nickel plated brass sensing face and socket connerctor: plastic m45 x 1,5 sw55 5 70 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-23 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) o 23-01-2007 13:29 pagina a-23 www..net
l1 l2 l5 led d l1 l2 l5 led d l1 l2 l5 led d l1 l2 l5 led d housing a housing b housing b-4 housing b-5 ? short series ? amplified in d.c. 3 wires ?cable output technical data: supply voltage (u b ): see ordering references max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,22 mm 2 on 6,5 and 8 mm 0,35 mm 2 on 12 mm 0,50 mm 2 on 18 and 30 mm protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) khz no-load supply current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dsa6, 5/4608lks) pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + no i brown black blue --- + nc i brown black blue --- + a a b b b - 4 b - 4 b - 5 b - 5 b - 5 b - 5 ? ? ? ? ? ? ? ? ? ? - 5 - 5 - 7 - 10 - 15 30 25 30 25 30 23 30 20 35 20 - - - - - - - - - - 30 30 30 30 30 30 30 30 35 35 - - - - - - - - - - 3,5 3,5 3,5 3,5 4 4 5 5 6 6 6,5 6,5 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 supplu voltage ( u b ) v (min - max) 7 30 7 30 7 30 7 30 7 40 7 40 5 40 5 40 7 40 7 40 1,5 2,5 1,5 2,5 2 4 5 8 10 15 4 3 4 3 2 1,5 0,8 0,6 0,8 0,4 dsa6,5/4609lks dsa6,5/5609lks dsa8/4609ks dsa8/5609ks dsa12/4609ks dsa12/5609ks dsa18/4609ks dsa18/5609ks dsa30/4609ks dsa30/5609ks dsa6,5/4619lks dsa6,5/5619lks dsa8/4619ks dsa8/5619ks dsa12/4619ks dsa12/5619ks dsa18/4619ks dsa18/5619ks dsa30/4619ks dsa30/5619ks 200 200 200 200 200 200 200 200 200 200 diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 4 4 4 10 15 35 sw36 5 80 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing 6,5 and 8 mm: stainless steel housing 12 30 mm: nickel plated brass sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-24 cylindrical inductive sensors in metal housing thickness mm catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-24 www..net
d l5 l1 l2 l4 m8 x 1 4 x led 1 4 3 d l1 l5 l2 l3l4 4 x led m8 x1 1 4 3 short series - diameters 6,5 - 8 mm ? amplified in d.c. ? connector output m8 x 1 ? technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing i-8 housing i-6 housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l5 mm n mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca45/4e08ks) pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + i - 8 i - 8 i - 6 i - 6 ? ? ? ? - 5 - 5 29,5 24,5 21 16 - - 8,5 8,5 35 35 35 35 5,5 5,5 5,5 5,5 11 - 12 11 - 12 11 - 12 11 - 12 6,5 6,5 m8 x 1 m8 x 1 1,5 2,5 1,5 2,5 4 3 4 3 dsa6,5/4909lks dsa6,5/5909lks dsa8/4909ks dsa8/5909ks dsa6,5/4919lks dsa6,5/5919lks dsa8/4919ks dsa8/5919ks 200 200 200 200 m8 x 1 sw13 4 10 diameter max tightening torque nm nut size thickness mm materials: housing: stainless steel sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-25 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-25 www..net
nc i 1 brown 2 white 3 blue --- + ? short series - diameters 8 - 12 - 18 - 30 mm ? amplified in d.c. ?connector output m12 x 1 d l5 l1 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 d l5 l1 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 d l5 l1 l2 l3 l4 m12 x 1 4 x led 3 4 2 1 housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) khz rated operational current ( i e ) ma npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dsa8/4308ks) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + i i i - 9 i - 9 i - 1 i - 1 i - 1 i - 1 ? ? ? ? ? ? ? ? - 5 - 7 - 10 - 15 26 21 30 23 25 15 25 25 13 13 10 10 16 16 17 17 8 8 8 8 8 8 8 8 47 47 48 48 49 49 50 65 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 supply voltage( u b ) v (min - max) 7 30 7 30 7 40 7 40 5 40 5 40 7 40 7 40 1,5 2,5 2 4 5 8 10 15 4 3 2 1 0,8 0,6 0,8 0,4 200 200 200 200 200 200 200 200 dsa8/4309ks dsa8/5309ks dsa12/4309ks dsa12/5309ks dsa18/4309ks dsa18/5309ks dsa30/4309ks dsa30/5309ks dsa8/43c9ks dsa8/53c9ks dsa12/43c9ks dsa12/53c9ks dsa18/43c9ks dsa18/53c9ks dsa30/43c9ks dsa30/53c9ks housing i housing i-1 housing i-9 technical data: supply voltage (u b ): see ordering references max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 pnp (positive switching) no i 1 brown 4 black 3 blue --- + materials: housing 8 mm: stainless steel housing 12 30 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-26 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-26 www..net
l1 l2 l3 l5 led d housing b-3 l1 l2 l3 l5 led d housing b-6 extended sensing distance - diameters 8 - 12 mm ? amplified in d.c. 3 wires ? cable output ? npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dce8/4608ks) technical data: supply voltage (u b ): see ordering references max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,22 mm 2 on 8 mm 0,35 mm 2 on 12 mm protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting (*) non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) hz rated operational current ( i e ) ma pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + no i brown black blue --- + nc i brown black blue --- + supplu voltage ( u b ) v (min - max) (*) note: see mounting precautions (pag. 22) materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing 8 mm: stainless steel housing 12 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 size sw13 sw17 4 4 10 15 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-27 cylindrical inductive sensors in metal housing thkns mm b - 6 b - 6 b - 6 b - 6 b - 3 b - 3 b - 3 b - 3 ? ? ? ? ? ? ? ? - - 5 5 - - 7 7 40 40 35 35 43 43 36 36 5 5 5 5 7 7 7 7 45 45 45 45 50 50 50 50 - - - - - - - - 3,5 3,5 3,5 3,5 4 4 4 4 m8 x 1 m8 x 1 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m12 x 1 m12 x 1 7?0 7?0 7?0 7?0 7?0 7?0 7?0 7?0 2 2,5 3 3,5 3 4 5 6 800 800 400 400 800 800 600 600 dcae8/4609ks dce8/4609ks dcae8/5609ks dce8/5609ks dcae12/4609ks dce12/4609ks dcae12/5609ks dce12/5609ks dcae8/4619ks dce8/4619ks dcae8/5619ks dce8/5619ks dcae12/4619ks dce12/4619ks dcae12/5619ks dce12/5619ks 200 200 200 200 200 200 200 200 catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-27 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-28 cylindrical inductive sensors in metal housing l1 l2 l5 led d ?extended sensing distance - diameters 18 - 30 mm ?amplified in d.c. 3 wires ?cable output npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dce8/4608ks) technical data: supply voltage (u b ): see ordering references max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting (*) non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) hz rated operational current ( i e ) ma pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + no i brown black blue --- + nc i brown black blue --- + supplu voltage ( u b ) v (min - max) housing b-2 l1 l2 l3 l5 led d housing g (*) note: see mounting precautions (pag. 22) materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m18 x 1 m30 x 1,5 size sw24 4 35 sw36 5 80 thkns mm b - 2 b - 2 b - 2 b - 2 g g g g - - 10 10 - - 15 15 50 50 40 40 50 50 35 35 - - - - 10 10 10 10 50 50 50 50 60 60 60 60 - - - - - - - - 5 5 5 5 6 6 6 6 m18 x 1 m18 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 m30 x 1,5 m30 x 1,5 7?0 7?0 7?0 7?0 7?0 7?0 7?0 7?0 8 10 12 14 15 20 20 28 300 300 200 200 100 100 100 100 dcae18/4a09ks dce18/4a09ks dcae18/5a09ks dce18/5a09ks dcae30/4609ks dce30/4609ks dcae30/5609ks dce30/5609ks dcae18/4a19ks dce18/4a19ks dcae18/5a19ks dce18/5a19ks dcae30/4619ks dce30/4619ks dcae30/5619ks dce30/5619ks 200 200 200 200 200 200 200 200 a028 9-02-2007 9:01 pagina a-28 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-29 cylindrical inductive sensors in metal housing extended sensing distance ? amplified in d.c. ? connector output m8 x 1 d l1 l5 l2 l4 4 x led m8 x 1 1 4 3 d l1 l5 l2 l4 4 x led m8 x 1 l3 1 4 3 housing i-5 housing i-10 technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dcae6,5/4908lks ) housing flush mounting (*) non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) hz rated operational current ( i e ) ma pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + (*) note: see mounting precautions (pag. 22) materials: housing: stainless steel sensing face: plastic m8 x 1 sw13 4 10 diameter max tightening torque nm nut size thickness mm i - 5 i - 5 i - 5 i - 5 i - 10 i - 10 i - 10 i - 10 ? ? ? ? ? ? ? ? - - 5 5 - - 5 5 48,5 48,5 43,5 43,5 40 40 35 35 - - - - 8,5 8,5 8,5 8,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 54 54 54 54 54 54 54 54 11 - 12 11 - 12 11 - 12 11 - 12 11 - 12 11 - 12 11 - 12 11 - 12 6,5 6,5 6,5 6,5 m8 x 1 m8 x 1 m8 x 1 m8 x 1 2 2,5 3 3,5 2 2,5 3 3,5 800 800 400 400 800 800 400 400 200 200 200 200 200 200 200 200 dcae6,5/4909lks dce6,5/4909lks dcae6,5/5909lks dce6,5/5909lks dcae8/4909ks dce8/4909ks dcae8/5909ks dce8/5909ks dcae6,5/4919lks dce6,5/4919lks dcae6,5/5919lks dce6,5/5919lks dcae8/4919ks dce8/4919ks dcae8/5919ks dce8/5919ks catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-29 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-30 cylindrical inductive sensors in metal housing ? extended sensing distance - diameter 8 - 12 mm ? amplified in d.c. ?connector output m12 x 1 technical data: supply voltage (u b ): see ordering references max ripple: 10% rated operational current (i e ): 200 ma no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-7 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-11 materials: housing 8 mm: stainless steel housing 12 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 size sw13 sw17 thkns mm 4 4 10 15 housing flush mounting (*) non flush mounting npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dce8/4308ks) mm mm mm mm mm n mm mm hz pnp (positive switching) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + v (min - max) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + female connector body diameter ( d ) l1 l2 l3 l4 l5 nominal sensing distance ( s n )?0% max switching frequency ( f ) ordering references supplu voltage ( u b ) (*) note: see mounting precautions (pag. 22) i - 11 i - 11 i - 11 i - 11 i - 7 i - 7 i - 7 i - 7 ? ? ? ? ? ? ? ? - - 5 5 -- 7 7 40 40 35 35 43 43 36 36 12 12 12 12 15 15 15 15 8 8 8 8 8 8 8 8 60 60 60 60 66 66 66 66 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m8 x 1 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m12 x 1 m12 x 1 7 30 7 30 7 30 7 30 7 40 7 40 7 40 7 40 2 2,5 3 3,5 3 4 5 6 800 800 400 400 800 800 600 600 dcae8/4309ks dce8/4309ks dcae8/5309ks dce8/5309ks dcae12/4309ks dce12/4309ks dcae12/5309ks dce12/5309ks dcae8/43c9ks dce8/43c9ks dcae8/53c9ks dce8/53c9ks dcae12/43c9ks dce12/43c9ks dcae12/53c9ks dce12/53c9ks catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-30 www..net
extended sensing distance - diameters 18 - 30 mm ? amplified in d.c. ? connector output m12 x 1 ? technical data: supply voltage (u b ): see ordering references max ripple: 10% rated operational current (i e ): 200 ma no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-12 d l1 l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-2 materials: housing: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m18 x 1 m30 x 1,5 size sw24 thkns mm 4 35 sw36 5 80 housing flush mounting (*) non flush mounting npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dce8/4308ks) mm mm mm mm mm n mm mm hz pnp (positive switching) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + v (min - max) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + female connector body diameter ( d ) l1 l2 l3 l4 l5 nominal sensing distance ( s n )?0% max switching frequency ( f ) ordering references supplu voltage ( u b ) (*) note: see mounting precautions (pag. 22) bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-31 cylindrical inductive sensors in metal housing i - 12 i - 12 i - 12 i - 12 i - 2 i - 2 i - 2 i - 2 ? ? ? ? ? ? ? ? - - 10 10 - - 15 15 50 50 50 50 65 65 50 50 19 19 19 19 17 17 17 17 8 8 8 8 8 8 8 8 77 77 87 87 90 90 90 90 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m18 x 1 m18 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 m30 x 1,5 m30 x 1,5 7 40 7 40 7 40 7 40 7 40 7 40 7 40 7 40 10 10 14 14 20 20 28 28 300 300 200 200 100 100 100 100 dcae18/4309ks dce18/4309ks dcae18/5309ks dce18/5309ks dcae30/4309ks dce30/4309ks dcae30/5309ks dce30/5309ks dcae18/43c9ks dce18/43c9ks dcae18/53c9ks dce18/53c9ks dcae30/43c9ks dce30/43c9ks dcae30/53c9ks dce30/53c9ks catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-31 www..net
nc i brown black blue --- + no i brown black blue --- + ? short series - extended sensing distance ? amplified in d.c. 3 wires ?cable output npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dse6,5/4608lks) technical data: supply voltage (u b ): see ordering references max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,22 mm 2 on 6,5 and 8 mm 0,35 mm 2 on 12 mm 0,50 mm 2 on 18 and 30 mm protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting (*) non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) hz rated operational current ( i e ) ma supply voltage( u b ) v (min - max) a b b - 4 b - 4 b - 5 b - 5 b - 5 b - 5 ? ? ? ? ? ? ? ? - - - 7 - 10 - 15 30 30 30 23 35 25 35 20 - - - - - - - - 30 30 30 30 35 35 35 35 - - - - - - - - 3,5 3,5 4 4 5 5 6 6 6,5 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 7 30 7 30 7 30 7 30 7 40 7 40 7 40 7 40 2,5 2,5 4 6 10 14 20 28 800 800 800 600 300 200 100 100 dse6,5/4609lks dse8/4609ks dse12/4609ks dse12/5609ks dse18/4609ks dse18/5609ks dse30/4609ks dse30/5609ks dse6,5/4619lks dse8/4619ks dse12/4619ks dse12/5619ks dse18/4619ks dse18/5619ks dse30/4619ks dse30/5619ks 200 200 200 200 200 200 200 200 pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + l1 l2 l5 led d l1 l2 l5 led d l1 l2 l5 led d l1 l2 l5 led d housing a housing b housing b-4 housing b-5 (*) note: see mounting precautions (pag. 22) diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing 6,5 and 8 mm: stainless steel housing 12 30 mm: nickel plated brass sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-32 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-32 www..net
short series - extended sensing distance ? amplified in d.c. ? connector output m8 x 1? technical data: supply voltage (u b ): 7 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dse6,5/4908lks) housing flush mounting (*) non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm n mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) hz rated operational current ( i e ) ma pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + no i 1 brown 4 black 3 blue --- + nc i 1 brown 4 black 3 blue --- + i - 8 i - 6 ? ? - - 29,5 21 - 8,5 5,5 5,5 35 35 11 - 12 11 - 12 6,5 m8 x 1 2,5 2,5 800 800 200 200 dse6,5/4909lks dse8/4909ks dse6,5/4919lks dse8/4919ks d l5 l1 l2 l4 m8 x 1 4 x led 1 4 3 d l1 l5 l2 l3l4 4 x led m8 x1 1 4 3 housing i-8 housing i-6 (*) note: see mounting precautions (pag. 22) materials: housing: stainless steel sensing face: plastic m8 x 1 sw13 4 10 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-33 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-33 www..net
? short series - extended sensing distance ? amplified in d.c. ?connector output m12 x 1 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dse8/4308ks) mm mm mm mm mm n mm mm hz pnp (positive switching) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + i i - 9 i - 9 i - 1 i - 1 i - 1 i - 1 ? ? ? ? ? ? ? - - 7 - 10 - 15 26 30 23 30 25 25 25 13 10 10 19 15 17 17 8 8 8 8 8 8 8 47 48 48 57 58 50 65 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 v (min - max) 7 30 7 30 7 30 7 40 7 40 7 40 7 40 2,5 4 6 10 14 20 28 800 800 600 300 200 100 100 dse8/4309ks dse12/4309ks dse12/5309ks dse18/4309ks dse18/5309ks dse30/4309ks dse30/5309ks dse8/43c9ks dse12/43c9ks dse12/53c9ks dse18/43c9ks dse18/53c9ks dse30/43c9ks dse30/53c9ks no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + housing flush mounting (*) non flush mounting female connector body diameter ( d ) l1 l2 l3 l4 l5 nominal sensing distance ( s n )?0% max switching frequency ( f ) ordering references supplu voltage ( u b ) technical data: supply voltage (u b ): see ordering references max ripple: 10% rated operational current (i e ): 200 ma no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 4% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 d l5 l1 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 d l5 l1 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 d l5 l1 l2 l3 l4 m12 x 1 4 x led 3 4 2 1 housing i housing i-1 housing i-9 (*) note: see mounting precautions (pag. 22) diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 materials: housing 8 mm: stainless steel housing 12 30 mm: nickel plated brass sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-34 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:29 pagina a-34 www..net
max switching frequency ( f ) khz rated operational current ( i e ) ma voltage drop (u d ) v 1,5 1,5 1,5 2,2 2,2 2,2 4 4 2 1 0,8 0,15 150 150 150 250 250 250 d l5 l1 l2 led l1 l2 l3 l5 led d l1 l2 l3 l5 led d with extended temperature range (- 40 + 85c) ? amplified in d.c. 3 and 4 wires ? cable output ? technical data: supply voltage (u b ): 10 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): see ordering references temperature range: - 40 + 85? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,35 mm 2 on 6,5 - 8 - 12 mm 0,50 mm 2 on 18, 30 and 45 mm protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing b-6 housing b-3 l1 l2 l3 l5 led d housing g housing a-3 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca6,5/4608lkst) housing flush mounting non flush mounting cable diameter body diameter ( d ) l2 mm l3 mm l5 mm mm mm nominal sensing distance ( s n )?0% mm pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + a - 3 b - 6 b - 3 b - 3 g g ? ? ? ? ? ? 45 40 43 58 50 50 - 5 7 12 10 10 45 45 50 70 60 60 4 4 4 5 6 6 6,5 m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 m45 x 1,5 1,5 1,5 2 5 10 20 dca6,5/4609lkst dca8/4609kst dca12/4609kst dca18/4609kst dca30/4609kst dca45/4609kst dca6,5/4619lkst dca8/4619kst dca12/4619kst dca18/4619kst dca30/4619kst dca45/4619kst no + nc i black brown white blue + --- no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- - - - dca18/4629kst dca30/4629kst dca45/4629kst materials: cable: 2 m thermoplastic 140?; 300 v; o.r. housing 6,5 and 8 mm: stainless steel housing 12 45 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 4 4 4 10 15 35 sw36 5 80 m45 x 1,5 sw55 5 70 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-35 cylindrical inductive sensors in metal housing thkns mm catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-35 www..net
housing i - 16 i - 17 i - 18 i - 19 i - 19 d l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-19 max switching frequency ( f ) khz rated operational current ( i e ) ma voltage drop (u d ) v 1,5 1,5 2,2 2,2 2,2 4 2 1 0,8 0,15 150 150 250 250 250 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca8/4308kst) flush mounting non flush mounting body diameter ( d ) l2 mm l3 mm l4 mm mm mm nominal sensing dist. ( s n ) 10% mm pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + ? ? ? ? ? 40 43 50 65 50 12 15 19 17 19 8 8 8 8 8 60 66 77 90 77 m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 m45 x 1,5 1,5 2 5 10 20 dca8/4309kst dca12/4309kst dca18/4309kst dca30/4309kst dca45/4309kst dca8/43c9kst dca12/43c9kst dca18/43c9kst dca30/43c9kst dca45/43c9kst no + nc i 4 black 1 brown 2 white 3 blue + --- no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + no + nc i 4 black 1 brown 2 white 3 blue + --- - dca12/4329kst dca18/4329kst dca30/4329kst dca45/4329kst ? with extended temperature range (-40 + 85c) ? amplified in d.c. 3 and 4 wires ?connector output m12 x 1 technical data: supply voltage (u b ): 10 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): see ordering references temperature range: - 40 + 85? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 d l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 d l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-17 housing i-18 d l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-16 l5 female connector (see pag. h - 1) n 8b -10...t 8b -10...t 8b -10...t 8b -10...t 8b -10...t materials: housing 8 mm: stainless steel housing 12 45 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thkns mm 4 4 4 10 15 35 sw36 5 80 m45 x 1,5 sw55 5 70 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-36 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-36 www..net
max switching frequency ( f ) khz rated operational current ( i e ) ma voltage drop (u d ) v 1,5 1,5 1,5 2,2 2,2 2,2 4 4 2 1 0,8 0,15 150 150 150 250 250 250 d l5 l1 l2 housing a-3 l1 l2 l3 l5 d l1 l2 l3 l5 d d l1 l5 l2 l1 l2 l3 l5 d for high temperatures (-25 +125c) ? amplified in d.c. 3 and 4 wires ? cable output npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca6,5/4608lkt) technical data: supply voltage (u b ): 10 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): see ordering references temperature range: - 25 +125? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 cable conductor cross section: 0,35 mm 2 on 6,5 - 8 - 12 mm 0,50 mm 2 on 18 - 30 - 45 mm protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l2 mm l3 mm l5 mm mm mm nominal sensing distance ( s n )?0% mm pnp (positive switching) ordering references no i brown black blue --- + nc i brown black blue --- + a - 3 b - 6 b - 3 b - 7 g g ? ? ? ? ? ? 45 40 43 65 50 50 - 5 7 - 10 10 45 45 50 65 60 60 4 4 4 5 6 6 6,5 m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 m45 x 1,5 1,5 1,5 2 5 10 20 dca6,5/4609lkt dca8/4609kt dca12/4609kt dca18/4609kt dca30/4609kt dca45/4609kt dca6,5/4619lkt dca8/4619kt dca12/4619kt dca18/4619kt dca30/4619kt dca45/4619kt no + nc i black brown white blue + --- no i brown black blue --- + nc i brown black blue --- + no + nc i black brown white blue + --- - - - dca18/4629kt dca30/4629kt dca45/4629kt housing b-6 housing b-3 housing b-7 housing g materials: cable: 2 m thermoplastic 140?; 300 v; o.r. housing 6,5 and 8 mm: stainless steel housing 12 45 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 4 4 4 10 15 35 sw36 5 80 m45 x 1,5 sw55 5 70 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-37 cylindrical inductive sensors in metal housing thickness mm catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-37 www..net
housing i - 11 i - 7 i - 12 i - 2 i - 2 max switching frequency ( f ) khz rated operational current ( i e ) ma voltage drop (u d ) v 1,5 1,5 2,2 2,2 2,2 4 2 1 0,8 0,15 150 150 250 250 250 npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca8/4308kt) flush mounting non flush mounting body diameter ( d ) l2 mm l3 mm l4 mm mm mm nominal sensing dist. ( s n ) 10% mm pnp (positive switching) ordering references no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + ? ? ? ? ? 40 43 50 65 50 12 15 19 17 19 8 8 8 8 8 60 66 77 90 77 m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 m45 x 1,5 1,5 2 5 10 20 dca8/4309kt dca12/4309kt dca18/4309kt dca30/4309kt dca45/4309kt dca8/43c9kt dca12/43c9kt dca18/43c9kt dca30/43c9kt dca45/43c9kt no + nc i 4 black 1 brown 2 white 3 blue + --- no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 white 3 blue --- + no + nc i 4 black 1 brown 2 white 3 blue + --- - dca12/4329kt dca18/4329kt dca30/4329kt dca45/4329kt ? for high temperatures (-25 + 120c) ? amplified in d.c. 3 and 4 wires ?connector output m12 x 1 technical data: supply voltage (u b ): 10 30 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): see ordering references temperature range: - 25 +120 c max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 l5 female connector (see pag. h - 1) n 8b -10...t 8b -10...t 8b -10...t 8b -10...t 8b -10...t materials: housing 8 mm: stainless steel housing 12 30 mm: nickel plated brass sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 d l5 l2 l3 m12 x 1 l4 3 4 2 1 housing i-19 d l5 l2 l4 m12 x 1 l3 3 4 2 1 d l5 l2 l4 m12 x 1 l3 3 4 2 1 housing i-17 housing i-18 d l5 l2 l4 m12 x 1 l3 3 4 2 1 housing i-16 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-38 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-38 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-39 cylindrical inductive sensors in metal housing general features: this new series solves definitively the problem of the ingress of liquids to the inner parts of the sensors. thanks to the inner hermetic sealing they can be submitted to no- stop jets of liquids under pressure even in presence of temperature changes. they find application in automatic washing machinery, in machines subject to water jets and in continuous immersion applications. technical data: supply voltage (u b ): 7 60 vdc max ripple: 10% rated operational current (i e ): 400 ma no-load supply current (i o ): 10 ma voltage drop (u d ): 2,2 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip68 switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 no i 1 brown 4 black 3 blue --- + female connector n - - - - 6 - 8b -10 6 - 8b -10 ordering references pnp (positive switching) degree of protection ip68 ? amplified in d.c. 3 and 4 wires ? cable and connector output m12 x 1 ? d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 l1 l2 l5 led d d l1 l5 l2 l3 led housing j-1 housing j-2 housing i-12 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm max switching frequency ( f ) khz j - 1 j - 1 j - 2 j - 2 i - 12 i - 12 ? ? ? ? ? ? - 10 - 10 - 10 50 40 58 48 50 50 - - 12 12 19 19 50 50 70 70 77 87 - - - - 8 8 5 5 5 5 - - m18 x 1 m18 x 1 m18 x 1 m18 x 1 m18 x 1 m18 x 1 5 8 5 8 5 8 1 1 1 1 1 1 dca18/4a09ksj dca18/5a09ksj dca18/4609ksj dca18/5609ksj dca18/4309ksj dca18/5309ksj npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca18/4a08ksj) no + nc i 4 black 1 brown 2 white 3 blue + --- no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 black ( * ) 3 blue - + ( * ) note: in versions with connector use the white wire. no + nc i 4 black 1 brown 2 white 3 blue + --- nc i 1 brown 2 black ( * ) 3 blue - + ( * ) note: in versions with connector use the white wire. materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing and gland: nickel plated brass sensing face: plastic m18 x 1 sw24 4 35 diameter max tightening torque nm nut size thickness mm dca18/4a19ksj dca18/5a19ksj dca18/4619ksj dca18/5619ksj dca18/43c9ksj dca18/53c9ksj - - dca18/4629ksj dca18/5629ksj dca18/4329ksj dca18/5329ksj bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-39 catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-39 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-40 max switching frequency ( f ) khz 0,8 0,6 0,8 0,6 rated operational current ( i e ) ma 200 200 200 200 general features: this new series solves definitively the problem of the ingress of liquids to the inner parts of the sensors. thanks to the inner hermetic sealing they can be submitted to no- stop jets of liquids under pressure even in presence of temperature changes. they find application in automatic washing machinery, in machines subject to water jets and in continuous immersion applications. technical data: supply voltage (u b ): 5 40 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip68 switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 no i 1 brown 4 black 3 blue --- + female connector n - - 6 - 8b -10 6 - 8b -10 ordering references pnp (positive switching) ? short series - degree of protection ip68 ? amplified in d.c. 3 wires ?cable and connector output m12 x 1 l1 l2 l5 led d housing j-3 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n ) 10% mm j - 3 j - 3 i - 1 i - 1 ? ? ? ? - 10 - 10 30 20 25 15 - - 15 15 30 30 48 48 - - 8 8 5 5 - - m18 x 1 m18 x 1 m18 x 1 m18 x 1 5 8 5 8 dsa18/4609ksj dsa18/5609ksj dsa18/4309ksj dsa18/5309ksj dsa18/4619ksj dsa18/5619ksj dsa18/43c9ksj dsa18/53c9ksj npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dsa18/4608ksj) no i 1 brown 4 black 3 blue --- + nc i 1 brown 2 black ( * ) 3 blue - + ( * ) note: in versions with connector use the white wire. nc i 1 brown 2 black ( * ) 3 blue - + ( * ) note: in versions with connector use the white wire. d l5 l1 l2 l3 l4 m12 x 1 4 x led 3 4 2 1 housing i-1 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing and gland: nickel plated brass sensing face: plastic m18 x 1 sw24 4 35 diameter max tightening torque nm nut size thickness mm bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-40 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-40 www..net
m30 x 1,5 sw36 5 80 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-41 cylindrical inductive sensors in metal housing non polarized ? amplified in d.c. 2 wires ? cable output l1 l2 l3 l5 led d housing b-6 l1 l2 l3 l5 led d general features: these sensors are not polarized and the load can be connected on both posi- tive and negative lead (function pnp or npn). so they can replace traditional mechanical microswitches in many applica- tions. technical data: supply voltage (u b ): 10 55 vdc max ripple: 10% off-state current (i r ): 1 ma minimum operational current (i m ): 5 ma voltage drop (u d ) with i e = 10 ma: 5 v voltage drop (u d ) with i e = 100 ma: 6 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,34 mm 2 on 8 and 12 mm 0,50 mm 2 on 18 mm 0,75 mm 2 on 30 mm protected against short-circuit and overload (versions with letter k) suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm mm mm nominal sensing distance ( s n )?0% mm max switching frequency ( f ) hz rated operational current (i e ) ma ordering references no i black black b - 6 b - 6 b - 3 b - 3 b - 2 b - 2 g g ? ? ? ? ? ? ? ? - 5 - 7 - 10 - 15 40 35 43 36 50 40 50 35 5 5 7 7 - - 10 10 - - - - - - - - 45 45 50 50 50 50 60 60 4 4 4 4 5 5 6 6 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 1,5 2,5 2 4 5 8 10 15 1200 1000 1200 1000 1100 700 800 400 100 100 200 200 250 250 250 250 dcm8/4600s dcm8/5600s dcm12/4600ks dcm12/5600ks dcm18/4a00ks dcm18/5a00ks dcm30/4600ks dcm30/5600ks nc i black black dcm8/4610s dcm8/5610s dcm12/4610ks dcm12/5610ks dcm18/4a10ks dcm18/5a10ks dcm30/4610ks dcm30/5610ks housing b-3 l1 l2 l5 led d housing b-2 l1 l2 l3 l5 led d housing g max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 size sw13 sw17 sw24 4 4 4 10 15 35 diameter materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing 8 mm: stainless steel housing 12-18-30 mm: nickel plated brass sensing face: plastic pbt thickness mm catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-41 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-42 cylindrical inductive sensors in metal housing ordering references mm mm mm mm mm n mm mm no (connectors 3 or 4 wires) i 3 blue 4 black nc (connectors 4 wires) i 1 brown 2 white i - 11 i - 11 i - 7 i - 7 i - 12 i - 12 i - 2 i - 2 ? ? ? ? ? ? ? ? - 5 - 7 - 10 - 15 40 35 43 36 50 50 65 50 12 12 15 15 19 19 17 17 8 8 8 8 8 8 8 8 60 60 66 66 77 87 90 90 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 hz 1200 1000 1200 1000 1100 700 800 400 1,5 2,5 2 4 5 8 10 15 dcm8/4300s dcm8/5300s dcm12/4300ks dcm12/5300ks dcm18/4300ks dcm18/5300ks dcm30/4300ks dcm30/5300ks dcm8/4310s dcm8/5310s dcm12/4310ks dcm12/5310ks dcm18/4310ks dcm18/5310ks dcm30/4310ks dcm30/5310ks housing flush mounting non flush mounting female connector body diameter ( d ) l1 l2 l3 l4 l5 ma 100 100 200 200 250 250 250 250 rated operational current (i e ) max switching frequency ( f ) in d.c. general features: these sensors are not polarized and the load can be connected on both posi- tive and negative sectors (function pnp or npn). so they can replace traditional mechanical microswitches in many applica- tions. utilization of connectors without led is recommended. technical data: supply voltage (u b ): 10 55 vdc max ripple: 10% off-state current (i r ): 1 ma minimum operational current (i m ): 5 ma voltage drop (u d ) with i e = 10 ma: 5 v voltage drop (u d ) with i e = 100 ma: 6 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led protected against short-circuit and overload (versions with letter k) suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-7 housing i-12 d l1 l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-2 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-11 ? non polarized ? amplified in d.c. 2 wires ?connector output m30 x 1,5 sw36 5 80 max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 size sw13 sw17 sw24 4 4 4 10 15 35 diameter materials: housing 8 mm: stainless steel housing 12- 18 - 30 mm: nickel plated brass sensing face: plastic pbt nominal sensing distance ( s n ) ?0% thickness mm catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-42 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-43 max switching frequency ( f ) hz rated operational current ( i e ) ma 50 200 ordering references pnp (positive switching) nc i brown black blue --- + no i brown black blue --- + stainless steel sensing face ? amplified in d.c. 3 wires ? cable output led d l5 housing b-8 general features: this particular type of sensor has increased mechanical and chemical resistance: ? fluid ingress resistant ? pressure resistant ? corrosion resistant ? impact resistant ? vibration resistant ? abrasion and incandescent objects resistant these particulars characteristics are mainly dependent by the building of the body, which is made from a single solid piece of stainless steel. the absence of junctions doesnt allow the fluid ingress through the sensing face. a very special sealing system on the back side makes of this sensor the ideal solution for the most critical applications. technical data: supply voltage (u b ): 7 40 vdc max ripple: 10% no-load supply current (i o ): 10 ma voltage drop (u d ): 1,5 v temperature range: - 25 + 75? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip68 max pressure on the front side: 50 bar switch status indicator: yellow led cable conductor cross section: 0,50 mm 2 protected against short-circuit and overload protected against any wrong connection suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting (*) non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm mm l4 mm nominal sensing distance ( s n )?0% mm b - 8 ? - - - 45 - 5 m18 x 1 5 dca18/4609mksj dca18/4619mksj npn (negative switching) use the above mentioned part number changing the last number 9 with 8 (ie. dca18/4608mksj) no i brown black blue --- + nc i brown black blue --- + (*) note: see mounting precautions (pag. 22) m18 x 1 sw24 4 35 diameter max tightening torque nm nut size thickness mm materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: stainless steel sensing face: stainless steel bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-43 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-43 www..net
bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-44 ordering references npn (negative switching) no i brown black blue --- + ? amplified in d.c. 3 wires ? high precision ? switching hysteresis < 1 m ?cable output general features: this unique sensor enables the detection of metallic targets with extremely high preci- sion without contact. by using an implemented software algorithm and a laser working process it has a very stable and precise switching point with a hysteresis lower than 1 ?. applications: semiconductors industry quality control instruments high precision mechanical devices calibration equipments technical data: supply voltage (u b ): 5 13 vdc consumption: 10 ma voltage drop (i o =10 ma): 0.5 v voltage drop (i o =100 ma): 1 v output polarity: npn open collector output logic: normally open repeat accuracy (r): < 2 ? switch hysteresis (h): < 1 ? temperature range: 10 40? degree of protection: ip67 cable conductor cross section: 0,22 mm 2 electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 mm 3,5 cable diameter ips05/4608ks sensor diameter mm m5 x 0,5 amplifier diameter mm 8 nominal sensing distance ( s n ) 10% mm 0,9 max switching frequency ( f ) hz 100 rated operational current (i e ) ( ma 100 460 ? 1,8 ? 8 20 sw7 m5 x 0,5 sensing zone 38 2 m ? 3,5 yellow ring led around the cable flush mounting non flush mounting ? m5 x 0,5 sw7 2,5 2 diameter max tightening torque nm nut size thickness mm materials: cable: 2 m pvc cei 20 - 22 ii; 90? housing sensor and amplifier: stainless steel sensor amplifier (smooth body) bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-44 cylindrical inductive sensors in metal housing catalogo inglese 2 (a01-a46) ok 23-01-2007 13:30 pagina a-44 www..net

▲Up To Search▲

Price & Availability of DSA304309KS

	To Download DSA304309KS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .